Contact Us
Complete the simple form below to find out more about PU Sealer Int – 1 we’ll be in touch as soon as possible!
PU Sealer Int -1 - Shown in CM2 Mid Blue
PU Sealer Int -1 - Shown in CM4 Mid Grey
PU Sealer Int -1 - Shown in CM5 Dark Grey
PU Sealer Int -1 - Shown in CM6 Brick Red
PU Sealer Int -1 - Shown in CM7 Safety Yellow
PU Sealer Int -1 - Shown in CM9 Dark Green
PU Sealer Int -1
Description
Non-hazardous, fast curing PU self-smoothing resin for industrial and commercial flooring.
Uses
- Demarcation
- Car-parks
- Clean Rooms
- Hospitals
- Laboratories.
Benefits
- Attractive appearance
- Provides sealing of floors
- Fast Curing
- Chemical Resistant
Contact us for more information
Product Specification
Product: Leeson PU Sealer Int 1
Thickness: Typically 0.3-0.5mm
Substrate Requirements
The substrate should be dry to 75%RH as per BS8204 and free from rising damp.
Concrete: Primer must be used. Minimum 25N/mm2, free from laitance, dust and other contamination.
.
Products Included In This System
| Primer: | Conprime-2 (E4568) | 0.25kg/m2 |
| Chelford 52 Sand | 1kg/m2 | |
| Sealing Coat: | Leeson PU Ext-12 (PU5035) | 0.5kg/m2 |
| Antislip Coat: | PU4984 (Optional) | 0.3kg/m2 |
Detailed installation instructions are available on request
Installation Service
The installation should be carried out by an experienced contractor, details of contractors in your area can be obtained by contacting the company. For BBA approved work, a contractor approved by the BBA for this system must carry out the installation.
Important Note
Leeson Polyurethane’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.
UV Discolouration
*Please note that rubber crumb binder products are based on MDI polyurethane technology which is subject to colour change under exposure to UV. The strength of the system is not affected.
We have in-house UV testing facilities and can test customer’s rubber/binder combinations. We strongly urge our customers to use this service prior to using a new rubber.
Download Protective Coatings Brochure
Download Datasheet
Contact us for more information
Product Imagery
Other Colours available:
Technical Information
The figures below are typical properties achieved in laboratory tests at 21˚C and 55% Relative Humidity.
Temperature Resistance
Resistant to temperatures of up to 70˚C for long periods.
Chemical Resistance
To various acids, diesel and petrol as well as strong bases.
Elongation @ Break (PU4170)
Minimum 80% to BS2782 Part 3
Tensile Strength (PU4170)
Min 10 N/mm2 to BS2782 Part 3
Speed Of Cure
19˚C Overnight
Installation Cycle Time
From completion of surface prep to cure including anti-‐slip sealer 5 hours.
Aftercare – Cleaning and Maintenance
The surface should be swept regularly to keep it free of organic material such as leaves.
Environmental Impact
The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture of the products by Leeson Polyurethanes staff.
Further Information
To ensure you are specifying a fit for purpose surface for your project please consult our Area Sales Manager for your area or visit our website.
