Contact Us

Complete the simple form below to find out more about PU Anti-Skid for Roads Grip 2-1 – we’ll be in touch as soon as possible!

    *We, Leeson Polyurethanes Ltd will hold your name and email address in order to send you our newsletter. We may share your information with other Leeson Polyurethanes Ltd partners in order to provide you with relevant information keeping you up to date with the latest industry news. We would like to contact you by email to let you know about events and initiatives that may be of interest to you. If you do not wish to hear about these, please advise us on lpusales@icpgroup.com. You also have the right to require us to correct any inaccuracies in your information.

    PU Anti-Skid for Roads Grip 2-1

    Download Brochure

    Description

    A high performance, flexible polyurethane based anti-skid system for installation onto asphalt and concrete substrates. The system gives a hard wearing anti-skid surface approved for all Type 1 Roads by the BBA.

    Uses

    • All Type 1 Roads
    • Cycle Paths
    • Walkways
    • Drives
    • Pathways

    Benefits

    • Anti-Skid Surface
    • BBA Approved for over 12 years
    • Fast Curing
    • Excellent Wear Performance
    • No odour
    •  Non Flammable
    •  Resistant to oil, diesel & petrol
    Download Datasheet
    Contact us for more information

    Product Specification

    Product: Leeson Grip 2-1 (D3149/20)
    Thickness: 1.5-2mm of PU Resin

    Substrate Requirements

    The substrate should be dry to 75%RH as per BS8204
    and free from rising damp.

    Asphalt: No primer required.

    Concrete: Primer must be used. Minimum 25N/mm2, free from
    laitance, dust and other contamination.

    Products Included In This System

    Primer:Conprime-2 (E4568)0.25kg/m2
    Chelford 52 Sand Or PU3922 PU primer0.1kg/m2
    Bonding Coat:Leeson Grip 2-1 (D3149)1.7-2kg/m2
    Aggregate:Calcined bauxite 1-3mmNet 7kg/m2

    Detailed installation instructions are available on request

    Installation Service

    The installation should be carried out by an experienced contractor, details of contractors in your area can be obtained by contacting the company. For BBA approved work, a contractor approved by the BBA for this system must carry out the installation.

    Important Note

    Leeson Polyurethane’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.

    Download BBA Certificate for Leeson Anti-Skid

    BBA LOGO Anti Skid


    Download Datasheet
    Contact us for more information

    BBA Certificate

    Technical Information

    The figures below are typical properties achieved in laboratory tests at 21˚C and 55% Relative Humidity.

    Temperature Resistance

    Resistant to temperatures of up to 70˚C for long periods.

    Chemical Resistance

    To various acids, diesel and petrol as well as strong bases.

    Scuffing at 45˚C

    After 500 wheel passes Erosion Index <3

    Wear (Hot Applied)

    SRV (Initial) >65

    SRV (After 100,000 wheel passes) >70

    Bond Strength

    Greater than the cohesive strength of the concrete, >3 N/mm2

    Speed of Cure

    Traffic Ready: 2 hours @ 20˚C

    Environmental Impact

    The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture of the products by Leeson Polyurethanes staff.

    Further Information

    To ensure you are specifying a fit for purpose surface for your project please consult our Area Sales Manager for your area or visit our website.