Contact Us
Complete the simple form below to find out more about Hydropruf Balcony System – we’ll be in touch as soon as possible!
Hydropruf Balcony System
Description
A solvent free, fast curing, flexible balcony waterproofing system. It incorporates a polyurea waterproofing membrane that gives a strong crack bridging coat. A hard-wearing anti-slip layer is then applied.
Uses
- Balconies
- Walkways
- Roofs
Benefits
- Seamless waterproofing – no joints
- Fast Curing
- Excellent Wear Performance
- No odour
- Non Flammable
- Slip resistant with wear layer
Contact us for more information
Product Specification
Product: Leeson Balcony System
Thickness: Nominal 3mm
Substrate Requirements
The substrate should be dry to 75%RH as per BS8204
and free from rising damp.
Asphalt: No primer required
Concrete: Primer must be used. Minimum 25N/mm2, free
from laitance, dust and other contamination.
Products Included in this System
| Primer: | Conprime-2 (E4568) | 0.25kg/m2 |
| Chelford 52 Sand Or PU3922 PU primer | 1kg/m2 | |
| Waterproofing: | Leeson SG2 (PU4693 Spray) | 2.2kg/m2 |
| Leeson HA1 (PURA4421) | 2.2kg/m2 | |
| Wear Layer: | Leeson Grip 2-1 (D3149) | 1.3kg/m2 |
| Aggregate: | Quartz 0.4-0.8mm | 6kg/m2 |
Detailed installation instructions are available on request.
Installation Service
The installation should be carried out by an experienced contractor, details of contractors in your area can be obtained by contacting
the company.
Important Note
Leeson Polyurethane’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.
UV Discolouration
*Please note that rubber crumb binder products are based on MDI polyurethane technology which is subject to colour change under exposure to UV. The strength of the system is not affected.
We have in-house UV testing facilities and can test customers rubber/binder combinations. We strongly urge our customers to use this service prior to using a new rubber.
Download Datasheet
Contact us for more information
Product Imagery
Other Colours available:
Technical Information
The figures below are typical properties achieved in laboratory tests at 21˚C and 55% Relative Humidity.
Temperature Resistance
Resistant to temperatures of up to 70˚C for long periods.
Chemical Resistance
To various acids, diesel and petrol as well as strong bases.
Elongation @ Break (Membrane PU4693)
Min 600% to BS2782 Part 3
Tensile Strength (Membrane PU4693)
15 N/mm to BS2782 Part 3
Bond Strength
Greater than the cohesive strength of the concrete, >3 N/mm2
Speed of Cure
Traffic Ready: 2 hours @ 20˚C
Aftercare – Cleaning and Maintenance
The surface should be Cleaned Regularly
Environmental Impact
The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture of the products by
Leeson Polyurethanes staff.
Further Information
To ensure you are specifying a fit for purpose surface for your project please consult our Area Sales Manager for your area or visit our website.
