Contact Us

Complete the simple form below to find out more about PU Anti-Skid for Roads Grip 3-1 – we’ll be in touch as soon as possible!

PU Anti-Skid for Roads Grip 3-1

Description

A high performance, flexible polyurethane based anti-skid system for decorative applications. The system gives a hard wearing anti-skid surface.

Uses

  • Cycle Paths
  • Pedestrian Areas
  • Walkways
  • Drives
  • Pathways

Benefits

  • Anti-Skid Surface
  • Bonding of Decorative Aggregates
  • High Build System
  • Fast Curing
  • Excellent Wear Performance
  • No odour
  • Resistant to oil, diesel & petrol
Download Datasheet
Contact us for more information

Product Specification

Product: Leeson Grip 3-1 (PU4490/20)
Thickness: 2-3mm of PU Resin

Substrate Requirements

The substrate should be dry to 75%RH as per BS8204
and free from rising damp.

Asphalt: No primer required.

Concrete: Primer must be used. Minimum 25N/mm2, free from
laitance, dust and other contamination.

Products Included In This System

Primer: Conprime-2 (E4568) 0.25kg/m2
Chelford 52 Sand Or PU3922 PU primer 1kg/m2
Bonding Coat: Leeson Grip 3-1 (PU4490/2012) 2.5kg- 3kg/m2
Aggregate: Decorative Aggregate

Detailed installation instructions are available on request

Installation Service

The installation should be carried out by an experienced contractor, details of contractors in your area can be obtained by contacting the company. For BBA approved work, a contractor approved by the BBA for this system must carry out the installation.

Important Note

Leeson Polyurethane’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.


Download Datasheet
Contact us for more information

Product Imagery

Other Colours available:

Technical Information

The figures below are typical properties achieved in laboratory tests at 21˚C and 55% Relative Humidity.

Temperature Resistance

Resistant to temperatures of up to 50˚C for long periods.

Chemical Resistance

To various acids, diesel and petrol as well as strong bases.

Tensile Strength (3-1)

8 N/mm2 to BS2782 Part 3

Elongation @ Break

Greater than the cohesive strength of the concrete, >3 N/mm2

Speed of Cure

Traffic Ready: 2 hours @ 20˚C

Bond Strength

Greater than the cohesive strength of the concrete, >3 N/mm2

Speed of Cure

Traffic Ready: 2 hours @ 20˚C

Environmental Impact

The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture of the products by Leeson Polyurethanes staff.

Further Information

To ensure you are specifying a fit for purpose surface for your project please consult our Area Sales Manager for your area or visit our website.